Cisco Meraki MA-SFP-10GB-LR Compatible 10G SFP+ LR Transceiver Module (1310nm SMF 10km LC DDM)
Cisco Meraki MA-SFP-10GB-LR Compatible SFP+ Module is designed for optical communication applications and supports link lengths up to 10 km over LC duplex SMF fiber. The transceiver complies with SFF-8431, SFF-8432, and IEEE 802.3ae standards. Digital diagnostic monitoring is available via a 2-wire serial interface as specified in SFF-8472. Featuring low power consumption and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, radio and baseband units, and more.
Product Details
| Cisco Meraki Compatible | MA-SFP-10GB-LR | Vendor Name | Walsun |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | 1310nm | Max Distance | 10km |
| Connector | Duplex LC | Transmitter Type | 1310nm DFB |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -6.5~-0.5dBm | Receiver Sensitivity | < -14.4dBm |
| Protocols | 10G Ethernet, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
How to Choose Cisco 10G SFP+ for Ideal Distance?
The selection of the optimum transmission distance of Cisco 10G SFP+ module matters. The following Cisco SFP+ compatibility matrix would divide the transmission distance of Cisco 10 gig SFP into three parts, Cisco 10GBASE-T, Cisco 10G multimode SFP+, and Cisco singlemode SFP+ 10G transceiver modules.
Cisco 10GBASE-T SFP+ Transceiver: ≦30m
The Cisco 10GBASE-T SFP+ is a hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link. It interfaces with RJ-45 connector, so you can use cat6a or cat7 network cable to connect. The transmission distance varies under different transmission speed. Under 10Gbp/s, the maximum transmission distance is 30m. It can arrive up to 50m for 5Gbps and 2.5Gbps. The transmission distance can be up to 100m under 1000Mbps.
Cisco 10G Multimode SFP+ Transceiver: 100m~400m
The Cisco SFP-10G-SR module uses 2000 MHz*km multimode fiber (OM3) to transmit data, and the transmission distance of this Cisco 10G multimode SFP+ can be up to 300m. About other information about Cisco SFP-10G-SR, you can learn more in the SFP-10G-SR datasheet. The Cisco 10GBASE-LRM module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade Multimode Fiber (MMF). The maximum transmission distance can be 300m on standard singlemode fiber (SMF, G.652). Cisco SFP-10G-SR-X, however, can achieve transmission distance of 400m on multimode fiber.
Cisco Singlemode SFP+ 10G Transceiver: 10km~80km
For very long span 10GbE deployment, e.g. connectivity between two buildings, mostly beyond 10km, Cisco singlemode SFP+ modules are the preferred option defined by IEEE. Cisco 10GBASE-LR module supports link lengths of 10 km on standard singlemode fiber (SMF, G.652). Cisco 10GBASE-ER SFP+ supports up to 40 km on SMF. And Cisco 10GBASE-ZR module achieves up to 80 kilometers on standard SMF(G.652). For detailed information about Cisco 10GBASE-LR-S, SFP-10G-LR-X, Cisco SFP-10G-ER-S, SFP-10G-ZR-S, you can check the above table.
FAQs About Cisco 10G SFP+
Q1: What do -S and -X signify, as in SFP-10G-SR-S and SFP-10G-SR-X?
A: -S in SFP-10G-SR-S means S-class, the S-class is different from Non-class in temperature range, networking environment and cost. -X in SFP-10G-SR-X signifies the extended ability for temperature. The module could be operated under wider temperature variation, from -40℃ to 85℃ (-40℉ to 365℉).
Q2: Can we use SFP+ optical module in SFP slots?
A: The answer is NO. As a rule of thumb, the SFP optical module can be operated in the SFP+ slot, but the SFP+ optical module can’t run in the SFP slot. When you insert a SFP+ module on a SFP port, the speed of this port is 1G instead of 10G.
Q3: Can Cisco SFP+ transceivers be used in other brands equipment?
A: No, Cisco SFP+ transceivers are not encouraged to use in other brands equipment because the codes from different vendors might be unmatched. However, some optical switches from certain vendors can be matched with any other brands devices.
Q4: What is the difference between SFP-10G-LR and SFP-10G-LRM?
A: The Cisco 10GBASE-LRM module supports link lengths of 220m on multimode fiber and 300m on singlemode fiber, while Cisco 10GBASE-LR supports 10km on standard singlemode fiber. The price of Cisco SFP-10G-LR is a little bit higher than Cisco SFP-10G-LRM.
Q5: Can 10GBASE-T down-support 10/100/1000Mbps?
A: In most cases, 10GBASE-T SFP+ can auto-negotiate to 10/100/1000Mbps data rate, but it might vary according to different vendors. A 10GBASE-T transceiver from HPE, MikroTik, Walsu can down-support 10/100/1000Mbps. Cisco 10gbase-t SFP+ can operate at 10, 100, or 1000 Mbps on some Cisco devices.
Q6: Can I use Cisco compatible SFP+ modules in any Cisco switch w/ SFP+ port?
A: Theoretically, Cisco compatible SFP+ modules cannot be used in any Cisco switches as different Cisco switches have distinct requirement for codes and hardware. For example, Cisco SFP/SFP+ is not certified to work with Cisco Meraki products. For Cisco 10G transceiver module compatible switches, you can refer to Cisco 10-Gigabit Ethernet transceiver modules compatibility matrix and Cisco 10-Gigabit Ethernet transceiver modules datasheet.
Related Article:
Cisco DS-SFP-FC32G-LW Compatible 32G SFP28 LW 1310nm 10km LC SMF DDM Transceiver Module
Cisco SFP-10G-BX60D-I Compatible 10G BX SFP+ BIDI TX1330nm-RX1270nm 60km LC SMF DDM Transceiver Module
Cisco DS-SFP-FC8G-LW Compatible 8G SFP+ LW 1310nm 10km LC SMF DDM Transceiver Module
Cisco SFP-10G-ER-40 Compatible 10G SFP+ ER 1310nm 40km LC SMF DDM Transceiver Module
Cisco SFP-10G-BX40D-I Compatible 10G BX SFP+ BIDI TX1330nm-RX1270nm 40km LC SMF DDM Transceiver Module
