Arista SFP-10G-TCompatible10G Copper SFP+ Transceiver Module (100m RJ45 Cat 6a/7 Cable)
Table of Contents
ToggleProduct Details
| Arista Compatible | SFP-10GE-T100 | Vendor Name | Walsun |
| Form Factor | SFP+ | Data Rate | 10Gbps, 5Gbps, 2.5Gbps, 1000Mbps |
| Power Consumption | 2.5W | Cable Distance | 100m |
| Interface | RJ-45 | DDM Support | No |
| Protocols | 10G Ethernet, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
How to Choose the Correct SFP+ Module?
We help more than 1400 clients choose the suitable SFP+ transceiver quickly. Here are the essential tips.
-
- Check your switch (or other network devices) port-supported speed and match the correct SFP+.
- Know your existing network cabling types. If you have a multimode fiber cabling structure, choose the multimode SFP+. A single mode transceiver is the only choice if you have single mode fiber cabling.
- Know your target link distance and link budget. But remember, choose an SFP+ supporting longer transmission distances than expected. Otherwise, poor fiber optic cable or a dirty fiber end-face may cause a failed link.
- Considering the operating temperature. For a typical indoor environment, using a commercial-grade SFP+ transceiver is enough. While in harsh outdoor applications, you should use the industrial transceiver.
- Remember to check compatibility with the vendor before ordering. Because the switch will not identify an incompatible transceiver, you will waste money and time. As a result, always use a known compatible transceiver.
Can 1G SFP Optics Run at 10G SFP+ Port?
SFP+ slots can take SFP modules, most do but not all. It may depend greatly on the switch models. SFP+ ports often accept SFP optics but at a reduced speed of 1Gb. And sometimes this port will lock the speed at 1Gb until you reload the switch or do some fancy set of commands. Besides, the SFP+ port usually don’t support speed under 1G. That is to say, you can’t plug the 100BASE SFP in the SFP+ port.
If you are unsure about the connectivity, it is suggested that you consult the vendor to make sure the 10Gb switch port supports dual rate before plugging an SFP transceiver into the SFP+ port on your 10Gb switch. Here are three popular switches whose 10G SFP+ ports can take 1G SFP optic modules.
| S5860-20SQ switch | S5860-48SC switch | S5860-24XB-U switch | |
|---|---|---|---|
| Ports | 20x 1G/10G SFP+, 4x 10G/25G, 2x 40G | 48x 1G/10G SFP+, 8x 40G/100G QSFP28 | 24x 100M/1000M/2.5G/5G/10G Base-T, 4x 1G/10G SFP+, 4x 10G/25G SFP28 |
| Key Features | QoS, IGMP Snooping, Link Aggregation, IPv6, L3 Static Routing, RIP, OSPF, BGP/ISIS, Advanced Security, Hardware Stacking, 1+1 Hot-swappable Power Supplies | QoS, IGMP Snooping, Link Aggregation, IPv6, L3 Static Routing, RIP, OSPF, BGP/ISIS, Advanced Security, Hardware Stacking, 1+1 Hot-swappable Power Supplies | Comply with PoE++ standard, QoS, IGMP Snooping, Link Aggregation, IPv6, L3 Static Routing, RIP, OSPF, BGP/ISIS, Advanced Security, Hardware Stacking, 1+1 Hot-swappable Power Supplies |
| AC/DC Power Supply | AC/DC | AC | AC |
| Application Scenario | Ideal for large-scale campus network aggregations, small and medium-sized network cores. | Ideal for campus network access/aggregation, 10 GE data center server access, and high-speed wireless device access. | |
FAQs About 10G SFP+ Transceivers
Q: SFP vs. SFP+. What is the difference?
A: The critical difference is the data transmission speed. SFP supports the typical rate of 155M, 1.25G, and 2.5G, whereas the SFP+ support 10G and 8G/16GFC.
Q: What is the maximum transmission distance SFP+ module?
A: It depends on the SFP+ speed. Take the 10G SFP+ as an example; most vendors provide an 80km version, but Walsun may provide an ultra-long distance of 100km over single mode fiber.
Q: Can I connect an SFP+ with an XFP module?
A: The answer is yes. But make sure that they have the same transmission speed and wavelength. Or else they will fail to establish a link.
Related Article:
Ciena 12434 Compatible 10G SFP+ ZR 1550nm 100km LC SMF DDM Transceiver Module
Brocade 10G-SFPP-BXU-20K Compatible 10G BX SFP+ BIDI TX1270nm-RX1330nm 20km LC SMF DDM Transceiver Module
AVAGO Broadcom AFCT-739SMZ Compatible 10G SFP+ LR 1310nm 10km LC SMF DDM Transceiver Module
Brocade XBR-000153 Compatible 8G SFP+ LW 1310nm 10km LC SMF DDM Transceiver Module
Arista Networks SFP-10G-ZR Compatible 10G SFP+ ZR 1550nm 80km LC SMF DDM Transceiver Module

