Dell SFP-10G-T-80Compatible 10G SFP+ RJ45 copper transceiver caters to 10 Gigabit Ethernet (10GbE) copper connections, delivering a cost-effective NBASE-T copper solution. The 10G copper module is backward compatible with 1GBASE-T, and intermediate rates 2.5GBASE-T, and 5GBASE-T, providing multi-gigabit Ethernet deployment. The module is compliant with IEEE 802.3an, IEEE 802.3az, and SFP+ MSA.
Product Details
| Product Number | SFP-10G-T-80 | Vendor Name | Walsun |
| Form Factor | SFP+ | Data Rate | 10Gbps, 5Gbps, 2.5Gbps, 1000Mbps |
| Power Consumption | 2.5W | Cable Distance | 80m |
| Interface | RJ-45 | DDM Support | No |
| Protocols | 10G Ethernet, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Frequently Asked Questions About 10GBASE-T SFP+ Module
Q: What cables are supported with 10GBASE-T SFP+ modules?
A: The module is compatible with 10GBASE-T, 1000BASE-T, and 100BASE-T. The Supported cables as below:
| Speed | Cable Type | Max. Cable Distance |
|---|---|---|
| 10GBASE-T | Cat 6a | 30m-50m |
| Cat6a shielded/Cat 7 | 80m-100 m | |
| 1000BASE-T / 100BASE-T | Cat 6/Cat 6a /Cat5e | 100m |
Q: Can the 10GBASE-T be used at low temperatures?
A: The 10GBASE-T is available in commercial and industrial versions. Standard products are suitable for operating temperature range of 0~70 °C. For a wider temperature range, it is recommended to purchase industrial modules (-40 to 85°C) .
Q: What are their differences of 10GBASE-T SFP+ vs SFP+ DAC vs Fiber SFP+?
A:10GBASE-T SFP+, SFP+ DAC, and SFP+ Transceiver are the most commonly used types in the 10G network.
| Comparsion | SFP+ DAC | 10GBASE-T SFP+ | SFP+ Fiber |
|---|---|---|---|
| Media | Integrated copper/fiber | Category 6a or 7 | Fiber Cable (SM/MM) |
| Connector | SFP+ | RJ45 | LC |
| Distance | 15m | 30m-100m | Max 100km |
| Cabling System | No | Copper cabling | Fiber cabling |
| Data rate | 10 Gbps | 10 Gbps | 10 Gbps |
| Power Consumption | 1~1.5w | 2~5w | ~0.7w |
Q: Where can 10GBASE-T be used?
A: If using 10GBASE-T, the places are required to be in the Data Center or horizontal areas (in building, including wiring closet). But it is not suited for vertical (riser links) applications within building, or campus & metro applications.
The 10GBASE-T modules are used in Data Center TOR areas.
Cases for 10GBASE-T Ethernet Connections
When the two switches both have SFP+ and 10GBASE-T ports, it is recommended to use the 10GBASE-T copper ports first, and save the SFP+ ports for possible future connections to an optical network for longer transmission distance.
Related Article:
Cisco Meraki MA-SFP-10GB-ZR Compatible 10G SFP+ ZR 1550nm 80km LC SMF DDM Transceiver Module
Cisco DWDM-SFP10G-C Compatible 10G DWDM Tunable SFP+ 50GHz 1529.16nm~1568.36nm 80km LC SMF DDM Transceiver Module
Extreme 10310 Compatible 10G SFP+ ZR 1550nm 80km LC SMF DDM Transceiver Module
H3C SFP-XG-T Compatible 10G Copper SFP+ 30m RJ45 without DDM Transceiver Module
D-Link DEM-435XT Compatible 10G SFP+ LRM 1310nm 220m LC MMF DDM Transceiver Module
